B.O.T.C.K- Bolt On TrackBar Correction kit Gen 1 Sequoia
- Free US shipping
- Low stock - 10 items left
- Backordered, shipping soon
Fits: Gen 1 Toyota Sequoia
What It Does
-
Fixes that sketchy, side-to-side axle swing after a lift.
-
Brings your track bar (panhard bar) back to a more natural, level position.
-
Keeps your rig tracking straight, planted, and predictable on-road and off.
Bolt-on design — no welding, no guesswork. - Standard height brackets can potentially contact frame under suspension cycle! Shorty bracket is not available for all models. All brackets on the market have the same potential!
Why It Matters
- When you lift your rig, the track bar angle gets steep. That forces the axle to swing left/right instead of moving up/down — making the rear feel unstable.
- The B.O.T.C.K. raises the pivot point to flatten that bar and bring your handling back to normal. Simple fix, huge difference.
Shorty vs. Regular – Pick the Right One
How to Pick the Correct B.O.T.C.K. Version
-
Park on level ground.
-
Measure from the ground to the center of the frame-side track-bar bolt.
-
Measure from the ground to the center of the axle-side track-bar bolt.
-
Subtract the two measurements to find your bolt-height difference:
-
1.5"–2.99" → Shorty Version (or use the bottom hole on the Standard bracket)
-
3" or higher → Standard Version (use the top hole)
Planning to lift higher later? Go with the Standard Version — it gives you extra mounting options as your suspension height changes.
Updates You Need to Know
-
No more flange nuts – now standard hex nuts.
- no longer need to clearance the abs tab
-
Washer for side bolt no longer needed.
-
Torque spec: 105 ft-lbs on oem bolt hole location and the rest of the bolts at 125lbs. All bolts / nuts should get blue loctite. If red. Use very little.
-
KDSS or non-KDSS? Doesn’t matter. Works with both.
Real Talk
-
Stop buying parts you don’t need — understand what it does before hitting checkout.
-
This kit isn’t just stronger than weld-on options — it spreads load evenly across the OEM mount instead of depending on the welds.
-
Designed for rigs that actually see dirt, not just mall crawlers.
What’s Included
-
Front bracket
-
Back bracket
-
Flag nut
-
(1x) M14 x 1.5 x 75mm flange head bolt
- (1x) M14 x 1.5 x 80mm flange head bolt
-
(2x) M14 x 1.5 x 35mm flange head bolt
-
(1x) M14 hex nut
-
All hardware is zinc coated
Fulfillment Time: Please allow 36–48 hours.
UPDATED: (Torque bolts to 105 ft-lb)
Frequently Asked Questions
Shorty or Standard — which do I need?
Park on level ground. Measure from the ground to the center of your frame-side track bar bolt, then do the same for the axle-side bolt. Subtract the two numbers:
- 1.5" – 2.99" difference → Get the Shorty (or use the bottom hole on the Standard bracket)
- 3" or higher → Get the Standard (use the top hole)
Planning to lift higher later? Go Standard — it gives you extra adjustment room as your suspension height changes.
Does this work with KDSS?
Yes. Works with both KDSS and non-KDSS setups — no modifications needed either way.
Do I need to weld anything?
No welding, no cutting, no guesswork. Completely bolt-on design — if you can use a wrench, you can install this.
20% restock fee ( no exceptions )!!
“Important shipping / insurance info: if you don’t choose more insurance to cover the cost of whatever you are buying and it is lost or damaged to the point where a claim is being made I will only cover $100 worth as that is the amount they only cover! You have been warned “
ATTENTION Canadian customers !! If you chose UPS as your shipping option , there are times where UPS will impose an import fee! I don’t know how they determine the cost but some customers are stating $100-$120 US dollars which is ridiculous! I have no control over it once it leaves me and enters Canada I think it’s a government fee they are charging UPS in which some one has to pay ! You have been warned There’s always DHL option and USPS
We want you to be completely satisfied with your purchase. Please read our return and exchange policy carefully before initiating a request.
Eligibility for Returns
- Items must be unused, uninstalled, and in brand-new condition with no signs of attempted installation.
- The product must be properly packaged to prevent damage during transit.
- Customers must contact us before initiating a return to receive approval and instructions.
Restocking Fee & Return Shipping
- A 20% restocking fee applies to all returns, no exceptions.
- We will cover the cost of the return shipping label, but the item must be packaged securely to avoid damage.
Exchanges
- We do offer exchanges, but the customer is responsible for covering shipping costs both ways (returning the original item and shipping the new item).
- The product must be in brand-new, unused condition to qualify for an exchange.
Damaged Returns
- If the returned item arrives damaged or improperly packaged, we will send it back to you, and the return will not be processed.
By purchasing from us, you agree to these return and exchange terms. If you have any questions, please contact us before initiating a return or exchange.
